Circuit board plays a very important role in the whole electronic products, so what is it? In short, it is for the demand of high density and compressed space. Many conductive lines are combined and pressed on one board, and then various components are assembled and welded to this board. It can be seen that it integrates all electronic components. When electronic products show functional defects, the circuit board is suspected first. So how is the circuit board made? Now let's talk about it in detail.
1. Prepare copper clad laminate. Epoxy resin laminate is one of the more widely used laminates. Drill holes on the copper clad laminate and manufacture according to the orientation of PCB specification drawing.
2. For electroplating, that is to use chemical copper to conduct the hole, so that the two sides of the circuit can be connected into a whole.
3. Make the circuit on the copper plate. This process is also called figure handling, which is to remove the surplus copper according to the planned route, and then make copper wires on the copper surface.
4. Next is to do anti welding, that is, resistance welding, it has the role of maintaining the plate and circuit.
5. About characters, that is, words, it is the identification of circuit board assembly components. When you open your desktop computer, you can see such a board with words, that is, the circuit board we need, also known as PCB.
6. After the circuit board is made, it is necessary to define the scale. Now we go into the cutting process, also known as molding. It is cut into small pieces, and then its electrical function is tested to see if it can be turned on and if it is useful after power on.
After the completion of the above process, the circuit board is basically completed. When the circuit board passes the inspection, it is necessary to check its appearance to see if there are any defects, and then pack and load.
The article comes from:http://www.yspcb.cn
07-17
What are the circuit board detection methods?
1. Needle bed test methodIn this way, the probe with tension spring is connected to each detection point on the circuit board. The tension spring makes each probe have 100? -? 200g? Pressure to ensure excellent contact at each detection point, such a probe arranged together is called "n
07-17
What are the board types?
According to the classification of substrate: flexible circuit board, rigid circuit board and rigid flexible combination board.1. Flexible PCB (flexible board)Flexible board is a printed circuit board made of flexible substrate. Its advantage is that it can be bent to facilitate the asse
07-17
How to heat the circuit board?
1. After the heat dissipation of PCB board, the widely used PCB board is copper-clad / epoxy glass cloth or phenolic resin glass cloth, and a small amount of paper-based copper-clad board. Although these circuit board substrates have excellent electrical and processing functions, they have poor
07-17
What should we pay attention to when designing circuit board?
1. Spacing between patchesIt is a problem that engineers need to pay attention to the spacing between chip components in layout. If the spacing is too small, it is difficult to print solder paste and prevent solder continuity.The interval claims are as followsRequirements for equipme