1. Do not clean up with a brush
Most of the brushes are made up of animal hair. In the process of brushing, because of mutual conflict, it is inevitable to produce electrostatic induction. However, some small components on PCB board are simply disturbed, and even break through the components, which constitutes a more serious result; In addition, when cleaning up the brush, some hairs are ignored, which will cause unnecessary trouble for PCB transmission. Therefore, do not use a brush to clean up the dust.
2. Avoid blowing balloons
Most friends think that the use of balloon blowing is an ideal way, about some of the more boring PCB is still useful, and about the damp PCB is not working. Because the damp dust is often firmly adhered to the PCB board, it can not be blown off at all. In other words, even if it can be blown off, it may blow dust particles between the pins of components and get stuck there. For large-scale integrated circuits, the pins are denser, which is more serious. Therefore, we should avoid using balloons to deal with dust problems.
3. Don't hit quietly with your hands
As for the dust on the surface of PCB, many people choose to turn it over and hit it quietly with their hands. In fact, by doing so, the dust can be alleviated and the connection of PCB components can be loosened. Because PCB circuit board welding is extremely fine, a little attention, it will produce severe results.
2、 "Three requirements" of PCB cleaning
1. Try to avoid dusty places
To deal with the dust problem of PCB, we should start from the source and reduce the use in the dust covered occasions. For example, squares, stairs, windows, etc.
2. Select the professional cleaning part
3. Always check the PCB
The dust of PCB is formed by accumulating every inch. As usual, we should develop excellent habits of application and maintenance, so it is no longer so difficult to deal with the dust problem of PCB.
The article comes from:http://www.yspcb.cn
07-17
What are the circuit board detection methods?
1. Needle bed test methodIn this way, the probe with tension spring is connected to each detection point on the circuit board. The tension spring makes each probe have 100? -? 200g? Pressure to ensure excellent contact at each detection point, such a probe arranged together is called "n
07-17
What are the board types?
According to the classification of substrate: flexible circuit board, rigid circuit board and rigid flexible combination board.1. Flexible PCB (flexible board)Flexible board is a printed circuit board made of flexible substrate. Its advantage is that it can be bent to facilitate the asse
07-17
How to heat the circuit board?
1. After the heat dissipation of PCB board, the widely used PCB board is copper-clad / epoxy glass cloth or phenolic resin glass cloth, and a small amount of paper-based copper-clad board. Although these circuit board substrates have excellent electrical and processing functions, they have poor
07-17
What should we pay attention to when designing circuit board?
1. Spacing between patchesIt is a problem that engineers need to pay attention to the spacing between chip components in layout. If the spacing is too small, it is difficult to print solder paste and prevent solder continuity.The interval claims are as followsRequirements for equipme